Dedicated OFC Support
Become a Partner 
1G
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.
Features
Dual data-rate of
1.25Gbps/1.063Gbps operation
1310nm FP laser and PIN Photo
detector for 20km transmission
Compliant with SFP MSA and SFF-8472
with duplex LC receptacle
jacket
Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
Compatible with SONET
OC-24-LR-1
Compatible with RoHS
+3.3V single power supply
Operating case temperature:
Industrial: -40 to +85°C
10G
Single Fibre
10G Single Fibre is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for 10Gb/s duplex optical data communications application. The SFP+ BiDi module features a highly reliable 1330nm DFB transmitter and 1270nm PIN photo-detector into LC Simplex optical connector, which provides 20km link distance over single-strand single mode fibre.
Applications & Features
Support 10GBASE-SR/10G fibre
Channel
application
Compliant to SFP+ Electrical MSA
SFF-8431
Compliant to SFP+ Mechanical MSA
SFF-8432
Multi rate of up to 11.3Gbps
Transmission distance up to 150m
(OM3)
+3.3V single power supply
Low power consumption
Operating case
temp Commercial: 0°C to +70
°C
RoHS compliant
Password protection for A0h and
A2h
1G
Dual Fibre
dr.com 1G Dual Fibre Transceivers is a high performance, cost-effective module which has a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control. And monitor signals. The Receiver section uses a PIN receiver and the transmitter uses a 1310 Nm FP laser, up to 15dB link budge ensure this module 1000Base Ethernet 20km application.
Applications & Features
Dual data-rate of
1.25Gbps/1.063Gbps
operation
Compliant with SFP MSA and SFF-8472
with duplex LC receptacle
Digital Diagnostic Monitoring:
Internal Calibration or External
Calibration
Compatible with SONET OC-24-LR
Compatible with RoHS
+3.3V single power supply
10G
Dual Fibre
10G SFP+ Dual fibre 20Kms Transceiver is designed for 10GBASE-LR/EW, and 8.5G/10G fibre- Channel applications. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage
Applications & Features
Compliant with SFF-8431 and
IEE802.3ae
Data rate selectable ≤4.25Gbps
or
9.95Gbps to 10.3Gbps bit rates
link length up to 20km
Diagnostic Performance
Monitoring
of module temperature, supply
Voltages, laser bias current, transmit optical power, receive optical power
1G
Copper
dr.com Copper Small Form Pluggable (SFP) transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, whic h supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Puls e Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be acc essed with address of A0h via the 2wire serial CMOS EEPROM protocol.
Applications & Features
Up to 1.25Gb/s bi-direc tional data
links
Hot-pluggable SFP footprint
Extended case temperature range
(0°C to +70°C )
jacket
Fully metallic enclosure for low
EMI
Low power dissipation (1.05 W
typical)
Compact RJ-45 connector
assembly
Access to physical layer IC via
2-wire serial bus
1000 BASE-T operation in host
systems with SERDES interface
10/100/1000Mbps compliant in host
systems with SGMII interface
10G
Copper
10GBase-T SFP+ Transceiver, 10G T, 10G Copper, RJ-45 SFP+ CAT.6a Module, up to 30 Meters
Applications & Features
10GBASE-T SFP+ transceiver
module
for CAT6A/CAT7 cable, copper, RJ-45 connector.
RJ-45 Transceiver, 10Gb/s Copper
SFP, 10GBase-T SFP+, RJ45 SFP+, 30-Meter. Supports 100/1000Base-T using Cat
5e
cable or better.
100% Compatible with Cisco.
10Gtek
owns Compatibility LAB to meet the coding requirements for various brands
of
switches and routers.
40G
QSFP
The QSFP+ active optic cables are a high performance, low power consumption, long reach interconnect solution supporting InfiniBand QDR/DDR/SDR,12.5G/10G/8G/4G/2G fibre channel ,PCIe and SAS. It is compliant with the QSFP MSA and IEEE P802.3ba. dr.com QSFP AOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 11.3Gb/s, providing an aggregated rate of 45.2Gb/s. dr.com QSFP+AOC is one kind of parallel transceiver which provides increased port density and total system cost savings.
Applications & Features
Four-channel full-duplex active
optical cable
Transmission data rate up to
11.3Gbit/s per channel
Reliable VCSEL array technology
using multimode fibre
Available in standard lengths of 3,
5, 10, 15, 20, 30, 50,100m
Low power consumption less than
1.5W
Operating case temperature 0°C to
+70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
100G
QSFP
QSFP-100G series consists of Quad Small Form Factor Pluggable (QSFP28) transceiver modules that are specifically designed for high-performance integrated duplex data link over single mode optical fibre. These transceiver modules are compliant with the QSFP28 Multisource Agreement (MSA) and hot pluggable. These modules offer an easy way to be installed in QSFP28 MSA compliant ports at any time without the interruption of the host equipment operation. The QSFP-100G series also supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Applications & Features
Complies with the IEEE 802.3bm
100GBASE-SR4/LR4
Ethernet standard
QSFP28 multi-source agreement
(MSA)
compliant
Single LC connector
(QSFP-100G-LR4)
MPO/MTP optical connector
(QSFP-100G-SR4)
Distance up to 70m over OM3
fibre
and
100m over OM4
fibre (QSFP-100G-SR4)
Single power supply of 3.3V
Hot pluggable
Supports digital diagnostic
monitoring
(DDM)
Plug and Play installation
0 to 70 degrees C operating
temperature
1G
CWDM
The SFP transceivers are high performance, cost effective modules supporting data-rateof1.25Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: an uncooled CWDM DFB laser transmitter, aPINphotodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modulessatisfy class I laser safety requirements. Page 2 of 10 7 / 2014The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. Forfurther information, please refer to SFP MSA
Applications & Features
Data-rate of 1.25Gbps operation
CWDM 1450nm~1610nm DFB wavelengths
laser and
PIN photodetector for 80km transmission
Compliant with SFP MSA and SFF-8472
with duplex LC
receptacle
Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
Compatible with SONET
OC-24-LR-1
Compatible with RoHS
+3.3V single power supply
Operating case temperature:
Commercial Temperature: 0 to +70°C
Industrial Temperature: -40 to +85°C
10G
CWDM
SFP+ER CWDM Transceiver is a “Limiting module”, designed for 10GBASE-ER, and 2G/4G/ 8G/10G fibre- Channel applications. The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Applications & Features
Compliant with SFF-8431,SFF-8432
and
IEE802.3ae
10GBASE-ER, and 2G/4G/ 8G/10G
fibre
Channel applications.
Wavelength selectable to ITU-T
standards covering CWDM grid wavelengths
Cooled EML transmitter and PIN
receiver
link length up to 40km
Low Power Dissipation 1.5W
Maximum
-5oC to 70oC Operating Case
Temperature
Single 3.3V power supply
Diagnostic Performance
Monitoring
of
module temperature, supply
Voltages, laser bias current,
transmit
optical power, receive optical power
RoHS compliant and lead free
EPON
PON Module
EPON SFP transceiver is the family of high performance optical modules providing a symmetric 1.25 Gb/s downstream and 1.25 Gb/s upstream data link over a single fibre using a 1490 nm continuous-mode transmitter and 1310 nm burst-mode receiver. GPON SFP OLT transceivers support 1000BASE-PX20-D for 20 km applications
Applications & Features
1Connector type : SC
Simplex Communication
DFB--LD Laser
jacket
Distance 20km
Operating temp: 0~70°C
GPON
PON Module
GPON SFP is one type of gigabit optical transceivers that are used in GPON system, which is compliant with ITU-T G.984.2 standard. It is a bidirectional module that has SC receptacle and works over simplex single-mode fibre optic cable. A GPON SFP module transmits and receives signals of different wavelengths between the OLT at the Central Office side and the ONT at the end users side. GPON SFPs utilize both the upstream data and downstream data by means of Optical Wavelength Division Multiplexing (WDM).
Applications & Features
Reach: 1-5 km
Type SFP
Mode Multimode
Bandwidth 1Gb
Compatibility OptoSpan
Series Standard
Transmission Single fibre
Our Gallery
