Unarmoured cables are used as the backbone in Outside plants (OSP) environments to be installed into ducts underground either by blowing or pulling methods. These cables can be laid along high voltage lines inside ducts due to their dielectric nature. A wide range of cables are available as per the specific environmental conditions of cable deployment. View more...
OPTICAL FIBRE CABLE
dr.com offers a wide range of Optical Fibre Cables (Single-mode and Multimode) including Armoured, Un-armoured, Aerial, All-Dielectric Self Supporting Optical Fibre Cables, and Optical Fibre Direct to Home Cables. Cables are manufactured to conform to IEC-794, ITU-T, TC-55-2000 specifications and are type approved by the Department of Telecommunications, Government of India.
Unitube, Multitube, Patch cords.
Single-mode, Multi mode, primary coated with double UV cured acrylate.
NO. OF FIBRES IN A CABLE
2, 4, 6, 12, 24, 48, 72, 96, 144, 288. Other sizes on the order
Non-metallic (solid FRP Aramid yarn Glass yarn) and metallic (solid steel wire).
HDPE Black, HDPE Orange, LSZH, PVC
Water-resistant filling compound Water Blocking Material Water blocking powder tape if required.
If required, corrugated steel tape of 0.125 mm thickness coated with copolymer 0.05 mm thickness, longitudinally laid with a minimum overlap of 10%.
JACKET OUTER SHEATH
HDPE (Black), HDPE (ORANGE) LSZH , PVC
Armoured Cables are installed in Outside Plant Applications (OSP) suitable for indoor duct and direct-buried installations. The cable has a very high compressive strength and the amouring provides protection against rodents and other types of likely mechanical damage. Available in a variety of designs such as non-metallic steel tape and steel wire armouring cables. View more...
All Dielectric Self Supporting Fibre Optic Cable series are suitably designed for installation on poles in distribution and transmission environments where live wire installation is required. These cables are designed based on the required span length and the prevailing. View more...
Micro Cables are meant for use in micro ducts by air blowing techniques. The small outer diameter provides the required rigidity and flexibility for blowing/pushing through ducts. Its lower minimum bending radius makes it easy to operate and splice. Micro cables are used for laying in broadband and long haul networks in areas having confined spaces clogged with cables and open to further disruptive upgrades of the network. View more...
The premises cables are designed to be compact and can be used internally as well as externally. Tight Buffered cables are perfect for inter equipment connections. These cables have high strength and good bending performance. Tight buffers of 900 microns surrounded with strength member aramid yarn and jacketed with outer sheath. View more...