PLC splitter provides a low-cost light distribution solution with high stability and reliability. PLC splitters can offer a splitting ratio of up to 1x64, which is generally higher than the splits of FBT splitters that another common type of optical splitter.
With Connector
Quartz substrate integrated
waveguard
Good Uniformity and low
insertion loss
Low Polarization Dependent
Loss
Excellent Environmental
Stability
High Reliability
channel-to-channel
uniformity
Small size
Without Connector
Quartz substrate
integrated waveguard
Good Uniformity and low
insertion loss
Low Polarization Dependent
Loss
Excellent Environmental
Stability
High Reliability
channel-to-channel
uniformity
Small size
A planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from the Central Office (CO) to multiple premise locations. Pigtailed ABS splitter is most commonly used in the PON networks. It provides complete protection for inner optical components and cables, as well as designed for convenient and reliable installation, but its volume is relatively large. It's mainly used for various connection and distribution products(outdoor fibre distribution boxes) or network cabinets.
| Splitter Type | 1x8 PLC Splitter |
| Configuration Type | 1x8 |
| Connector type | SC/APC,SC/UPC,LC FC ST |
| fibre Length | 1m or 1.5m or Requested |
| Packing Style | ABS Module |
| fibre Type | Singlemode G657A1 or G652DO |
| Operating Bandwith | 1260~1650nm |
| fibre Diameter | 2.0mm,3.0mm |
| Typical insertion loss (≤) dB | 10.2 |
| Insertion loss C | 10.7 |
| Loss Uniformity (≤) dB | 0.8 |
| Polarization Dependent loss (≤) dB | 0.3 |
| Wavelength Dependent Loss (≤) dB | 0.3 |
| Return Loss (≥) | 50 |
| Directivity (≥) | 55 |
| Temperature Dependent Loss (≤) dB | 0.5 |
| Max Temperature Dependent Loss (-40~85°C) | 0.5 |
| Operating Temperature (°C) | - 40~85 |
| Storage Temperature (°C) | - 40~85 |
| Sealing Package Dimension (mm) | 100*80*10 |
PLC Plug-In Type (Cassette Type) SC/UPC is a Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features a small size, high reliability, wide operating wavelength range, and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. We provide the whole series of 4,8,16 PLUG-IN TYPE products that are tailored for a specific application.
Low Insertion Loss
Low PDL
High Return Loss
Uniform Power Splitting
Ratio Couplers are all fibre, polished directional couplers with a variable coupling ratio. These devices can divide or combine optical signals in fibre optics research. Available wavelengths include 630 nm, 830 nm, 980 nm, 1060 nm, 1300 nm, and 1550 nm.
Very precise coupling ratio
adjustment — from 0–100%
Low insertion loss
High polarization
isolation
PM and non-PM types are
available
Fibre Sleeves of 60mm have a length of 60mm (+-0.5mm) and Consist of a Rod, hot fusion tubing, and cross-linked Polyolefin. To rebuild the Fibre coating to provide mechanical strength at the joint fusion area and keep the optical transmission properties. Have 304-grade Stainless steel needles, Outer diameter:2.5~2.4 mm.
Moisture resistant to
environmental protection.
Clear sleeves make it easy
to detect splices before shrinkage.
Easily use and avoid any
damage to the oprtical fibre during installation.
Dedicated OFC Support
Become a Partner 
